Description: An error is detected at the FAX control section (MFP model only)
Causes: [Main/Engine PWB] Main/Engine PWB: YC2012 [Check the connection of the eKUIO connector] -Check if it is inserted into the upper slot. -Check if the direction of the FAX control PWB is correct.
Remedy: 1. Check the wire or connector between FAX PWB, IO replay PWB and Main/engine PWB and correct it if necessary. (Reconnect the connector or replace the wire) Check the operation after that. 2. Execute U021 (Init memory) and check function. 3. Replace the FAX PWB and check function. 4. Replace the main/engine PWB and check function. 5. Retrieve the USBLOG and contact the Service Administrative Division.