Code: 6030
Description: Broken fuser thermistor 2 wire The center thermistor A/D value is 4/1024 bit (19°C) or less, even if the main heater is turned on 10[sec] in succession.
Causes: Fuser unit. Fuser thermistor 2. Engine PWB
Remedy: Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser thermistor 2 and Engine PWB (YC9) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. If the I/F connector pins of the fuser unit and the main unit are deformed owing to foreign matters, such as paper dusts, replace the connectors or the units including the connectors.
Fuser thermistor 2 Replace the Fuser unit.
Engine PWB Replace the engine PWB.
Fuser thermistor 2 Replace the Fuser unit.
Engine PWB Replace the engine PWB.