Code: 8260
Description: DF middle motor error When the DF middle motor is driven, DF paddle sensor does not turn on within 1s.
Causes: DF middle motor. DF paddle sensor. DF main PWB
Remedy: DF middle motor 1. Execute U240 Motor - Middle(L) to check the finisher operation. 2. Check that the drive from the motor reaches the middle roller. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF middle motor and DF main PWB (YC12) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the DF middle motor.
DF paddle sensor 1. Execute U241 Finisher - Lead Paddle to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF paddle sensor and DF main PWB (YC19) 4. Replace the DF paddle sensor.
DF main PWB Replace the DF main PWB.
DF paddle sensor 1. Execute U241 Finisher - Lead Paddle to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF paddle sensor and DF main PWB (YC19) 4. Replace the DF paddle sensor.
DF main PWB Replace the DF main PWB.