Description: Fuser IH input over-voltage error The input voltage is greater than 140V for 200 ms in succession.
Causes: Defective connector cable or poor contact in the connector. Defective fuser IH PWB. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Fuser IH PWB (YC4) and engine PWB (YC26) Defective fuser IH PWB. Replace the fuser IH PWB and check for correct operation. Defective engine PWB. Replace the engine PWB and check for correct operation.