Description: Broken developer thermistor K wire The sensor input sampling is greater than 230.
Causes: Defective connector cable or poor contact in the connector. Defective developer thermistor K. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit K and front PWB (YC9) Front PWB (YC2) and engine PWB (YC10) Defective developer thermistor K. Replace developer unit K. Defective engine PWB. Replace the engine PWB and check for correct operation.