Code: 1030
Description: PF lift motor error (Paper feeder second cassette) The following states have been detected 5 times in succession. After the cassette is installed, the upper limit detection sensor does not turn on when passing the specified time. During printing, after the upper limit detection sensor detects off, and 1 s after ascending control, and the upper limit detection sensor does not detect on. In case the lift motor current detection AD value exceeds the threshold 500ms in succession while the lift motor is operated.
Remedy: Bottom plate Check if the bottom plate can move smoothly and repair or replace it if any problem is found. Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. If a wire is pinched by another component, or has defective conduction, replace it.
PF lift motor - PF main PWB (YC6) PF lift sensor - PF main PWB (YC4) PF main PWB - Engine PWB(YC23): 30 ppm model - Engine PWB(YC20): 35/40 ppm models Lift motor Drive transmission system 1. Check if the gears rotate smoothly. If not, clean the bushes and gears. 2. Check for broken gears and replace if any are found. PF lift motor Replace the PF lift motor. PF lift sensor (upper limit detection sensor) 1. Check if the PF lift sensor can be turned ON/OFF to suit the rise of the cassette bottom plate. 2. Replace the PF lift sensor. PF main PWB Replace the PF main PWB. Engine PWB Replace the engine PWB.
PF lift motor - PF main PWB (YC6) PF lift sensor - PF main PWB (YC4) PF main PWB - Engine PWB(YC23): 30 ppm model - Engine PWB(YC20): 35/40 ppm models Lift motor Drive transmission system 1. Check if the gears rotate smoothly. If not, clean the bushes and gears. 2. Check for broken gears and replace if any are found. PF lift motor Replace the PF lift motor. PF lift sensor (upper limit detection sensor) 1. Check if the PF lift sensor can be turned ON/OFF to suit the rise of the cassette bottom plate. 2. Replace the PF lift sensor. PF main PWB Replace the PF main PWB. Engine PWB Replace the engine PWB.