Description: CIS AGC error In case a normal input could not be obtained from the CIS at AGC. (35/40 ppm model only)
Remedy: CIS 1. Execute the U906 resetting the partial operation. 2. Execute [CIS] in the U061 lamp lighting check. 3. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. DPCIS - DPSHD PWB (YC2) DPSHD PWB (YC3) - DPIF PWB (YC2) 4. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. 5. Replace DPCIS and execute U091 and U411. DPSHD PWB Replace the DPSHD PWB.