Code: 7003
Description: Toner motor error (Magenta) In case the toner container rotation detection pulse signal does not change for 500ms in succession when turning the toner motor on, "Shake the toner container." message is indicated. (Resets by front cover open/close) The toner container rotation detection signals does change after repeating the above operation three times.
Remedy: Toner container 1. Check that the spiral of the toner container can be rotated by hand 2. Replace the toner container.
Drive transmission system for the toner motor 1. Check if the couplings and gears rotate smoothly, and if not, clean or grease the gears. 2. Check for broken couplings and gears, and replace if any are found.
Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. If a wire is pinched by another component, or has defective conduction, replace it. 3. Toner motor - Engine PWB(YC14): 30 ppm model - Engine PWB(YC21): 35/40 ppm models
Toner motor 1. Check how the toner motor is attached. 2. Replace the toner motor.
Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the engine PWB.
Drive transmission system for the toner motor 1. Check if the couplings and gears rotate smoothly, and if not, clean or grease the gears. 2. Check for broken couplings and gears, and replace if any are found.
Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. If a wire is pinched by another component, or has defective conduction, replace it. 3. Toner motor - Engine PWB(YC14): 30 ppm model - Engine PWB(YC21): 35/40 ppm models
Toner motor 1. Check how the toner motor is attached. 2. Replace the toner motor.
Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the engine PWB.