Code: C2810
Description: Waste toner motor error
After driving of the waste toner motor starts, the error signal is not at the H level for 2 s continuously.
After driving of the waste toner motor starts, the error signal is not at the H level for 2 s continuously.
Causes: Poor contact in the connector terminals
Defective drive transmission system.
Defective waste toner motor.
Defective engine PWB
Defective drive transmission system.
Defective waste toner motor.
Defective engine PWB
Remedy: Poor contact in the connector terminals. Check the connection of connector YC12 on the engine PWB and the connector of the waste toner motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective waste toner motor. Replace the waste toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective waste toner motor. Replace the waste toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.