Code: 2202
Description: Drum motor M/C/Y steady-state error After the motor is stabilized, the ready signal is turned OFF for continuous 1 s.
Remedy: Drum unit M/ C/Y Check that the drum can be rotated by hand, and if it is locked, replace the drum unit M/C/Y.
Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check the continuity within the connector wire. If none, replace the wire. Drum motor M/C/Y - Engine PWB(YC16): 30 ppm model - Engine PWB(YC23): 35/40 ppm models
Drive transmission system for the drum motor M/C/Y 1. Check if the couplings and gears rotate smoothly, and if not, clean or grease the gears. 2. Check for broken couplings and gears, and replace if any are found.
Drum motor M/C/Y Replace the drum motor M/C/Y.
Engine PWB Replace the engine PWB.
Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check the continuity within the connector wire. If none, replace the wire. Drum motor M/C/Y - Engine PWB(YC16): 30 ppm model - Engine PWB(YC23): 35/40 ppm models
Drive transmission system for the drum motor M/C/Y 1. Check if the couplings and gears rotate smoothly, and if not, clean or grease the gears. 2. Check for broken couplings and gears, and replace if any are found.
Drum motor M/C/Y Replace the drum motor M/C/Y.
Engine PWB Replace the engine PWB.