Code: 2700
Description: 3-color release error In case the position signal does not change when passing 5s after the transfer belt release was switched.
Remedy: Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check the continuity within the connector wire. If none, replace the wire. Transfer release motor - Engine PWB(YC10): 30 ppm model - Engine PWB(YC17): 35/40 ppm models
Drive transmission system for the transfer release motor 1. Check if the rollers and gears rotate smoothly. If not, clean or grease the bushes and gears. 2. Check for broken gears and replace if any are found.
Transfer release motor Replace the transfer release motor.
Engine PWB Replace the engine PWB.
Drive transmission system for the transfer release motor 1. Check if the rollers and gears rotate smoothly. If not, clean or grease the bushes and gears. 2. Check for broken gears and replace if any are found.
Transfer release motor Replace the transfer release motor.
Engine PWB Replace the engine PWB.