Description: CCD AGC error In case a normal input could not be obtained from the CCD at AGC.
Remedy: LED lamp PWB 1. Execute [CCD] in the U061 lamp lighting check. 2. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. LED PWB - CCD PWB (YC2) CCD PWB (YC1) - Engine PWB (YC5) 3. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. 4. Replace the image scanner carriage and execute U411. CCD PWB Replace the image scanner carriage and execute U411. Engine PWB Replace the engine PWB.