Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 8990 — Kyocera TASKalfa 406ci

Code: 8990

Description: Finisher setup error In case the bridge (AK) is not installed while the DF is connected. (35/40 ppm model only)
Remedy: Finisher 1. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. DF main PWB - Engine PWB(YC24): 30 ppm model - Engine PWB(YC31): 35/40 ppm models 2. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire.
DF main PWB 1. Check EEPROM mount and correct it. 2. Replace the DF main PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 406ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie