Code: C2000
Description: Drive motor problem
Stable OFF is detected for 1 s continuously after drive motor stability. The drive motor is not stabilized in 6 s since the motor is activated.
Stable OFF is detected for 1 s continuously after drive motor stability. The drive motor is not stabilized in 6 s since the motor is activated.
Causes: Poor contact in the connector terminals.
Defective drive transmission system.
Defective drive motor.
Defective engine PWB.
Defective drive transmission system.
Defective drive motor.
Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and the connector on the drive motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective drive motor. Replace the drive motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective drive motor. Replace the drive motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.