Code: C3300
Description: Optical system (AGC) problem
After AGC, correct input is not obtained at CCD.
After AGC, correct input is not obtained at CCD.
Causes: Poor contact in the connector terminals.
Defective exposure lamp or inverter PWB.
Defective PWB.
Defective exposure lamp or inverter PWB.
Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC5 on the ISM PWB and the connector on the inverter PWB, and the continuity across the connector terminals. Repair or replace if necessary.
Defective exposure lamp or inverter PWB. Replace the exposure lamp or inverter PWB.
Defective PWB. Replace the ISM PWB, ISC PWB or CCD PWB and check for correct operation.
Defective exposure lamp or inverter PWB. Replace the exposure lamp or inverter PWB.
Defective PWB. Replace the ISM PWB, ISC PWB or CCD PWB and check for correct operation.