Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C4000 — Kyocera TASKalfa 420i

Code: C4000

Description: Polygon motor synchronization problem
The polygon motor does not reach the stable speed within 20 s of the START signal turning on.
Causes: Poor contact in the connector terminals.
Defective polygon motor.
Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC3 on the engine PWB and laser scanner unit, and the continuity across the connector terminals. Repair or replace if necessary.
Defective polygon motor. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 420i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie