Code: C4100
Description: BD initialization problem
5 consecutive BD errors were detected during an 800 ms interval after the polygon motor stabilized.
5 consecutive BD errors were detected during an 800 ms interval after the polygon motor stabilized.
Causes: Poor contact in the connector terminals.
Defective polygon motor.
Defective engine PWB.
Defective polygon motor.
Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC3 on the engine PWB and laser scanner unit, and the continuity across the connector terminals. Repair or replace if necessary.
Defective polygon motor. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective polygon motor. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.