Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8140 — Kyocera TASKalfa 420i

Code: C8140

Description: Main tray problem (optional 3000sheet document finisher)
The main tray is not detected by the main tray upper limit detection sensor or the main tray paper upper surface detection sensor within 20 s since the tray has started ascending. The main tray upper limit detection sensor or the main tray paper upper surface detection
Tray elevation motor problem (optional document finisher) The tray low limit sensor or paper surface sensor 1/2 cannot be detected to be on within 10 s since the tray elevation motor is activated.
Causes: Poor contact in the connector terminals.
Defective main tray motor.
Defective main tray
Defective finisher main PWB.
The tray elevation motor connector makes poor contact.
The tray elevation motor malfunctions.
The tray lower limit sensor, paper surface sensor 1/2 connector makes poor contact.
Defective tray lower limit sensor, paper surface sensor 1/2.
Defective finisher main PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC11 on the finisher main PWB and the connector on the main tray motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective main tray motor. Replace the main tray motor.
Defective main tray upper limit detection sensor/main tray paper upper surface detection sensor/main tray lower limit detection sensor. Replace the sensor.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.
The tray elevation motor connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
The tray elevation motor malfunctions. Replace the tray elevation motor.
The tray lower limit sensor, paper surface sensor 1/2 connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective tray lower limit sensor, paper surface sensor 1/2. Replace the sensor.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 420i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie