Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1400 — Kyocera TASKalfa 500ci

Code: C1400

Description: Rotary guide motor error
Rotary guide sensor does not turn on.
Causes: Poor contact in the connector terminals.
Broken gear s or couplings of rotary guide motor.
Defective rotary guide motor.
Defective rotary guide sensor.
Poor contact in the connector terminals.
Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector of the rotary guide motor and the connector YC2 on the main front PWB, and the continuity across the connector terminals. Repair or replace if necessary.
Broken gears or couplings of rotary guide motor. Replace rotary guide motor.
Defective rotary guide motor. Check for continuity across the coil. If none, replace rotary guide motor.
Defective rotary guide sensor. Check if YC2-8 on the main front PWB goes low when rotary guide sensor is turned off. If not, replace rotary guide sensor.
Poor contact in the connector terminals. Check the connection of connector of the rotary guide sensor and the connector YC2 on the main front PWB, and the continuity across the connector terminals. Repair or replace if necessary.
Defective PWB. Main front PWB or engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 500ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie