Code: C2550
Description: Paper conveying motor error
After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
Causes: Poor contact in the connector terminals.
Defective drive transmission system.
Defective paper conveying motor.
Defective PWB.
Defective drive transmission system.
Defective paper conveying motor.
Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC24 on the engine PWB and the connector on the MP motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective paper conveying motor. Run maintenance item U030 and check if the motor operates. If not, replace the paper conveying motor.
Defective PWB. Replace the feed PWB or engine PWB and check for correct operation.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective paper conveying motor. Run maintenance item U030 and check if the motor operates. If not, replace the paper conveying motor.
Defective PWB. Replace the feed PWB or engine PWB and check for correct operation.