Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C4010 — Kyocera TASKalfa 500ci

Code: C4010

Description: Polygon motor steady-state problem
The rated speed achievement signal turns to H every other 24 s after the polygon motor is stabilized.
Causes: Poor contact in the connector terminals.
Defective polygon motor.
Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC13 on the engine PWB and laser scanner unit, and the continuity across the connector terminals. Repair or replace if necessary.
Defective polygon motor. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 500ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie