Code: C6000
Description: Fuser heater 1 break Fuser thermistor 1 detects a temperature lower than the Ready indication temperature for 90 s during warming up. Fuser thermistor 1 deduced less than 130 C/266F for 5 s during stand-by. Fuser thermistor 1 does not reach 75C/ 167F even after 30 s during warming up.
Causes: Defective fuser heater 1.
Defective fuser thermostat 1.
Installation defectiveness on fuser thermistor 1.
Defective PWB.
Defective fuser thermostat 1.
Installation defectiveness on fuser thermistor 1.
Defective PWB.
Remedy: Defective fuser heater 1. Check for continuity across each heater. If none, replace the fuser unit.
Defective fuser thermostat 1. Check for continuity across thermostat. If none, remove the cause and replace the fuser unit.
Installation defectiveness on fuser thermistor 1. Measure the resistance. If it is ∞, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.
Defective fuser thermostat 1. Check for continuity across thermostat. If none, remove the cause and replace the fuser unit.
Installation defectiveness on fuser thermistor 1. Measure the resistance. If it is ∞, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.