Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8350 — Kyocera TASKalfa 500ci

Code: C8350

Description: Centerfold side registration motor 1 problem (optional center-folding unit of 3000-sheet document finisher)
The home position is not detected when initial operation even if 1 s passed.
Roller motor problem (optional document finisher)
The roller sensor does not turn on/off within specified time of the roller motor turning on.
Causes: Poor contact in the connector terminals.
Defective centerfold side registration motor 1.
Defective PWB.
The roller sensor, roller motor connector makes poor contact.
Defective roller sensor.
Defective roller motor.
Defective finisher main PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC7 on the centerfold main PWB and the connector of centerfold side registration motor 1, and the continuity across the connector terminals. Repair or replace if necessary.
Defective centerfold side registration motor 1. Replace centerfold side registration motor 1.
Defective PWB. Replace the centerfold main PWB or finisher main PWB and check for correct operation.
The roller sensor, roller motor connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective roller sensor. Replace the roller sensor.
Defective roller motor. Replace the roller motor.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 500ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie