Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8320 — Kyocera TASKalfa 520i

Code: C8320

Description: Centerfold paper conveying belt motor problem (optional center-folding unit of 3000-sheet document finisher)
The home position is not detected when initial operation even if 2.5 s passed.
Adjustment motor 2 problem (optional document finisher) The adjustment sensor 2 does not turn on/off within specified time of the adjustment motor 2 turning on.
Causes: Poor contact in the connector terminals.
Defective centerfold paper conveying belt motor 1/2.
Defective PWB.
The adjustment sensor 2, adjustment motor 2 connector makes poor contact.
Defective adjustment sensor 2.
Defective adjustment motor 2.
Defective finisher main PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC6, YC7 on the centerfold main PWB and the connector of centerfold paper conveying belt motor 1/2, and the continuity across the connector terminals. Repair or replace if necessary.
Defective centerfold paper conveying belt motor 1/2. Replace centerfold paper conveying belt motor 1/2.
Defective PWB. Replace the centerfold main PWB or finisher main PWB and check for correct operation.
The adjustment sensor 2, adjustment motor 2 connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective adjustment sensor 2. Replace the adjustment sensor 2.
Defective adjustment motor 2. Replace the adjustment motor 2.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 520i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie