Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8360 — Kyocera TASKalfa 520i

Code: C8360

Description: Centerfold main motor problem (optional center-folding unit of 3000sheet document finisher)
The motor lock signal is detected above 1 s during driving the centerfold main motor.
Slide motor problem (optional document finisher) The slide sensor does not turn on/off within specified time of the slide motor turning on.
Causes: Poor contact in the connector terminals.
Defective centerfold main motor.
Defective PWB.
The slide sensor, slide motor connector makes poor contact.
Defective slide sensor.
Defective slide motor.
Defective finisher main PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC12 on the centerfold main PWB and the connector of the centerfold main motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective centerfold main motor. Replace the centerfold main motor.
Defective PWB. Replace the centerfold main PWB or finisher main PWB and check for correct operation.
The slide sensor, slide motor connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective slide sensor. Replace the slide sensor.
Defective slide motor. Replace the slide motor.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 520i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie