Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C9040 — Kyocera TASKalfa 520i

Code: C9040

Description: DP lift motor going up error (optional DP) The tray upper limit switch does not turn on within 2 s of DP lift motor turning on.
Causes: Loose connection of the DP lift motor connector.
Malfunction of the DP lift motor.
Loose connection of the tray upper limit switch connector.
Malfunction of the tray upper limit switch.
Defective DP driver PWB.
Remedy: Loose connection of the DP lift motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Malfunction of the DP lift motor. Replace the DP lift motor and check for correct operation.
Loose connection of the tray upper limit switch connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Malfunction of the tray upper limit switch. Replace the tray upper limit switch and check for correct operation.
Defective DP driver PWB. Replace the DP driver PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 520i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie