Code: 4011
Description: Polygon motor steady-state error
After Polygon motor is stabilized, the ready signal is at the H level for 15 s continuously.
After Polygon motor is stabilized, the ready signal is at the H level for 15 s continuously.
Causes: Polygon motor (LSU). Engine PWB.
Remedy: Polygon motor (LSU) 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Polygon motor and Engine PWB (YC15) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the laser scanner unit.
Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB.
Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB.