Code: E120
Description: Bypass misfeeding (Paper not reaching the bypass feed sensor): Paper fed from the bypass tray does not reach the bypass feed sensor.
Remedy: 1. Are the bypass motor, bypass pick-up solenoid and bypass feed sensor working? (Perform the output check: 03-126, 03-254 and the input check: 03-[FAX]ON/[4]/[D]) * If it is working properly, proceed to 6. If not, check 2 to 5 below. 2. Check if the connector CN469, CN497, CN498 on the ADU board is disconnected from the bypass motor or the bypass feed sensor, or the harnesses are open circuited. Correct if any. 3. Replace the bypass motor. 4. Replace the bypass pick-up solenoid. 5. Replace the bypass feed sensor. 6. Replace the LGC board. 7. Check the rollers in the ADU. Replace them if they are worn out.