Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E511 — Kyocera TASKalfa 550c

Code: E511

Description: ADU misfeeding (Paper not reaching the ADU transport sensor-1)
Remedy: 1. Is the duplexing unit path entrance sensor working? (Perform the input check: 03-[SCAN]ON/[3]/ [H].) * If it is working properly, proceed to 6. If not, check 2 to 5 below. 2. Check if the connector CN511 on the PFC board is disconnected from the duplexing unit path entrance sensor or the harnesses are open circuited. Correct if so (including CN491 and CN492 on the ADU board). 3. Check if the duplexing unit path entrance sensor is correctly installed or the actuator is properly moved. 4. Replace the duplexing unit path entrance sensor. 5. Replace the PFC board. 6. Are the reverse motor and the ADU motor-1 working? (Perform the output check: 03-134, 03- 146.) * If they are working properly, proceed to 11. If not, check 7 to 10 below. 7. Check if the connector CN515 on the PFC board is disconnected from the reverse motor or the ADU motor-1, or the harnesses are open circuited. Correct if so (including CN537 and CN539 on the DRV board). 8. Replace the reverse motor or the ADU motor-1. 9. Replace the DRV board. 10.Replace the PFC board. 11.Check if there is any abnormality on the driving section of each motor or the roller. Correct if any.

← Xem tất cả mã lỗi Kyocera TASKalfa 550c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie