Description: Early arrival jam: The inlet sensor detects the paper earlier than a specified timing. [MJ-1103/1104]
Remedy: 1. Check if there is any paper in the finisher or on the transport path of the equipment or on the finishing tray. Remove it if there is. 2. Check if there is any disconnection, incorrect installation or breakage on the entrance sensor (S1). Correct if any. 3. Check if the connector CN7 on the finisher controller PC board is disconnected from the entrance sensor (S1) and the harnesses are disconnected or open circuited. Correct if any. 4. Replace the entrance sensor. 5. Replace the finisher controller PC board.