Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C2300 — Kyocera TASKalfa 552ci

Code: C2300

Description: Fuser motor error
After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
Causes: Poor contact in the connector terminals.
Defective drive transmission system.
Defective fuser motor.
Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC25 on the engine PWB and the connector of the fuser motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective fuser motor. Run maintenance item U030 and check if the fuser motor operates when YC25-B4 (remote signal) on the engine PWB goes low. If not, replace the fuser motor.
Defective engine PWB. Run maintenance item U030 and check if YC25-B4 (remote signal) on the engine PWB goes low. If not, replace the engine PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 552ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie