Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8250 — Kyocera TASKalfa 6052ci

Code: C8250

Description: DF main tray error 4 Object: 1000-sheet finisher
Causes: The lock-up signal was 0.7V or less for 10s continuously during the DF tray motor operation.
Remedy: 1 Checking the DF tray The DF tray is not assembled properly. If the DF tray is not shifted manually vertically, repair the part that restricts the operation. 2 Checking the DF tray drive components The DF tray drive components are not properly attached, or they are faulty. Reattach the DF tray drive components. Replace them if they are not fixed. 3 Checking the wire The wire is not properly connected or is faulty. Reinsert the following wire connectors, and replace the wires there is no continuity.• DF tray motor - DF main PWB• DF tray sensor 4 - DF main PWBOr, • DF tray sensor 5 (with the folding unit) - DF main PWB Electrical Diagram of PWBs 4 Replacing the DF tray motor The DF tray motor is faulty. Replace the DF tray motor if it does not operate properly when checking the operation at U240. U240 Execution 5 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. DF Main PWB Replacement

← Xem tất cả mã lỗi Kyocera TASKalfa 6052ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie