Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C4000 — Kyocera TASKalfa 620

Code: C4000

Description: Polygon motor synchronization problem
• The revolution does not reach the stable speed within 20 s of the START signal.
Causes: Poor contact in the polygon motor connector terminals.
Defective polygon motor.
Defective engine PWB.
Remedy: Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective polygon motor. Replace the laser scanner unit.
Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie