Code: C6050
Description: Fuser thermistor abnormal temperature detection • During copying, the temperature at the heat roller lower than 120C/248F is detected continuously for 5 s.
Causes: Installation defectiveness on fuser thermistor M and S.
Operation on fuser thermostat 1 or 2.
Installation defectiveness on fuser heater L, M or S.
Broken fuser heater L, M and S wire.
Defective engine PWB.
Defective AC power source PWB.
Operation on fuser thermostat 1 or 2.
Installation defectiveness on fuser heater L, M or S.
Broken fuser heater L, M and S wire.
Defective engine PWB.
Defective AC power source PWB.
Remedy: Installation defectiveness on fuser thermistor M and S. Check the mounting state of the fuser thermistor M and S. If any problem is found, repair it.
Operation on fuser thermostat 1 or 2. Check for continuity. If none, replace the fuser thermostat 1 or 2.
Installation defectiveness on fuser heater L, M or S. Check the mounting state of the fuser thermistor L, M and S. If any problem is found, repair it.
Broken fuser heater L, M and S wire. Check for continuity. If none, replace the fuser heater L, M and S.
Defective engine PWB. Replace the engine PWB.
Defective AC power source PWB. Replace the AC power source PWB.
Operation on fuser thermostat 1 or 2. Check for continuity. If none, replace the fuser thermostat 1 or 2.
Installation defectiveness on fuser heater L, M or S. Check the mounting state of the fuser thermistor L, M and S. If any problem is found, repair it.
Broken fuser heater L, M and S wire. Check for continuity. If none, replace the fuser heater L, M and S.
Defective engine PWB. Replace the engine PWB.
Defective AC power source PWB. Replace the AC power source PWB.