Code: C8010
Description: Document finisher paper conveying motor problem
• The LOCK signal of the paper conveying motor is detected for more than 500 ms while the paper conveying motor is operating. However, the first 1 s after the paper conveying motor is turned on is excluded from detection.
• The LOCK signal of the paper conveying motor is detected for more than 500 ms while the paper conveying motor is operating. However, the first 1 s after the paper conveying motor is turned on is excluded from detection.
Causes: Loose connection of the paper conveying motor connector.
Defective paper conveying motor.
Defective finisher main PWB.
Defective paper conveying motor.
Defective finisher main PWB.
Remedy: Loose connection of the paper conveying motor connector. Check the connection of connector YC14 on the finisher main PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective paper conveying motor. Replace the paper conveying motor and check for correct operation.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation
Defective paper conveying motor. Replace the paper conveying motor and check for correct operation.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation