Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8150 — Kyocera TASKalfa 620

Code: C8150

Description: Document finisher multi job tray problem
• When the multi job tray is not detected by the multi job tray upper limit detection sensor within 20 s from the moment it starts ascending.
• During multi job tray descent, the multi job tray upper limit detection sensor does not turn off within 500 ms after it turns on.
Causes: Loose connection of the multi job tray elevation motor connector.
Malfunction of the multi job tray elevation motor.
Malfunction of the multi job tray upper limit detection sensor.
Loose connection of the multi job tray upper limit detection sensor connector.
Defective finisher main PWB.
Remedy: Loose connection of the multi job tray elevation motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Malfunction of the multi job tray elevation motor. Replace the multi job tray elevation motor and check for correct operation.
Malfunction of the multi job tray upper limit detection sensor. Replace the multi job tray upper limit detection sensor and check for correct operation.
Loose connection of the multi job tray upper limit detection sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 620

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie