Code: C8320
Description: Document finisher centerfold unit centering plate problem
• During initialization, the centering plate is not detected in the home position when the centering plate returns to the home position.
• During initialization, the centering plate is not detected in the home position when the centering plate returns to the home position.
Causes: Loose connection of the centering plate motor connector.
Malfunction of the centering plate motor.
Malfunction of the centering plate home position sensor.
Loose connection of the centering plate home position sensor connector.
Defective centerfold unit main PWB.
Malfunction of the centering plate motor.
Malfunction of the centering plate home position sensor.
Loose connection of the centering plate home position sensor connector.
Defective centerfold unit main PWB.
Remedy: Loose connection of the centering plate motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Malfunction of the centering plate motor. Replace the centering plate motor and check for correct operation.
Malfunction of the centering plate home position sensor. Replace the centering plate home position sensor and check for correct operation.
Loose connection of the centering plate home position sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective centerfold unit main PWB. Replace the centerfold unit main PWB and check for correct operation.
Malfunction of the centering plate motor. Replace the centering plate motor and check for correct operation.
Malfunction of the centering plate home position sensor. Replace the centering plate home position sensor and check for correct operation.
Loose connection of the centering plate home position sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective centerfold unit main PWB. Replace the centerfold unit main PWB and check for correct operation.