Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C446 — Kyocera TASKalfa 650c

Code: C446

Description: Heater lamp abnormality after abnormality judgment (pre-running end temperature abnormality)
Remedy: 1,2,3,4. Check the thermopiles, Heater and LGC board Check the above components following the procedures 1, 2,3 and 4 for [C411/C412]. 5. Clear the status counter Change the current status counter value (08-400) “3”, “5”, “6”, “9”, “19”, “21”, “22”, “23”, “24”, “25”, “27” or “29” to “0” for [C44X], taking the same procedure as that for [C41X]. • The status counter value is as follows in the following cases. - The error occurred during warming-up: “3”, “5” or “6” - The error occurred after the equipment has become ready: “7” - The temperature detected by the fuser belt center thermopile is 230°C or higher, the temperature detected by the side thermopile is 230°C or higher or the temperature detected by the edge thermopile is 230°C or higher: “9”, “19”, “21”, “22”, “23”, “25”, “27” or “29”. - The error occurred during printing: “24” or “25 - The error occurred during energy saving: “27” - A paper jam occurred: “29”

← Xem tất cả mã lỗi Kyocera TASKalfa 650c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie