Description: Movable tray shift motor abnormality: The movable tray shift motor is not rotating or the movable tray is not moving normally. [MJ-1103/1104]
Remedy: MJ-1103/1104 Is there any mechanical problem when the movable tray is moved? YES Fix the mechanism. NO Is the harness between the movable tray shift motor (M7) and the finisher control PC board (CN8) disconnected or open circuited? l YES • Reconnect the connector securely. • Replace the harness. NO Is there a disconnection of the connector, incorrect installation or breakage of the movable tray position A, B, and C sensors (S13, S14, and S15)? l YES • Replace the harness. • Reinstall the sensor correctly. • Replace the sensor. NO 1. Replace the movable tray shift motor (M7). 2. Replace the finisher control PC board.