Code: E160
Description: 4th drawer misfeeding (Paper not reaching the 4th drawer feed sensor): The paper fed from the 4th drawer does not reach the 4th drawer feed sensor.
Remedy: 1. Open paper feed cover and check if there is any paper in front of the 4th drawer feed sensor. Remove it if there is. * If the error still occurs, check the following. 2. Is the 4th drawer feed sensor working? (Perform the input check: 03-[FAX]OFF/[8]/[D]) * If it is working properly, proceed to 7. If not, check 3 to 6 below. 3. Check if the connectors CN502 on the PFC board is disconnected from the 4th drawer feed sensor or the harnesses are open circuited. Check if the connector CN502 on the PFC board is disconnected. Correct if any. 4. Replace the 4th drawer feed sensor. 5. Replace the PFC board. 6. Is the 4th drawer feed clutch working? (Perform the output check: 03-122) * If it is working properly, proceed to 10. If not, check 7 to 9 below. 7. Check if the connectors CN507 on the PFC board is disconnected from the 4th drawer feed clutch or the harnesses are open circuited. Check if the connectors CN502 on the PFP board is disconnected. Correct if any. 8. Replace the 4th drawer feed clutch. 9. Replace the PFC board. 10.Check the 4th drawer feed roller, separation roller and pickup roller. Replace them if they are worn out.