Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E360 — Kyocera TASKalfa 650c

Code: E360

Description: 4th drawer transport jam (Paper not reaching the 3rd drawer feed sensor): The paper does not reach the 3rd drawer feed sensor after it has passed the 4th drawer feed sensor.
Remedy: 1. Open the PFP paper feed cover and check if there is any paper in front of the 3rd drawer feed sensor. Remove it if there is. * If the error still occurs, check the following. 2. Is the 3rd feed sensor working? (Perform the input check: 03-[FAX]OFF/[2]/[D]) * If it is working properly, proceed to 7. If not, check 3 to 6 below. 3. Check if the connectors CN349 on the LGC board is disconnected from the 3rd drawer feed sensor or the harnesses are open circuited. Check if the connectors CN 241 and CN243 on the PFP board are disconnected. Correct if any. 4. Replace the 3rd drawer feed sensor. 5. Replace the LGC board. 6. Is the PFP transport clutch working? (Perform the output check: 03-225) * If it is working properly, proceed to 12. If not, check 8 to 11 below. 7. Check if the connectors CN349 on the LGC board is disconnected from the PFP transport clutch or the harnesses are open circuited. Check if the connectors CN 241 and CN244 on the PFP board are disconnected. Correct if any. 8. Replace the PFP transport clutch. 9. Replace the LGC board. 10.Check the condition of the feed roller, separation roller and pickup roller of each paper source, and replace them if they are worn out. 11.Check the PFP transport roller. Replace it if it is worn out.

← Xem tất cả mã lỗi Kyocera TASKalfa 650c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie