Description: Door open jam: The upper/front cover of the finisher section or the upper/ front door of the puncher section has opened during printing. [MJ-1103/1104] Cover open error: The front cover or stationary tray cover is opened during paper transport. [MJ-1103/1104]
Remedy: 1. Close the front cover or the stationary tray cover if they are opened. 2. Replace the handle cover installed inside of the front cover if it is broken. 3. Reinstall the stationary tray opening/closing switch if it is incorrectly installed. 4. Check if the connector CN16 on the finisher controller PC board is disconnected from the front cover switch (SW1) and the stationary tray opening/closing switch (SW2) or the harnesses are open circuited. Correct if any. 5. Replace the sensors. 6. Replace the finisher controller PC board.