Code: 2810
Description: Waste toner motor error
Initialized when an error is constantly observed for 2 seconds after the waste toner motor is activated. An error is constantly observed for 2.5 seconds after rebooting.
Initialized when an error is constantly observed for 2 seconds after the waste toner motor is activated. An error is constantly observed for 2.5 seconds after rebooting.
Causes: Defective connector cable or poor contact in the connector
Defective drive transmission system of motor.
Defective waste toner motor.
Defective engine PWB.
Defective drive transmission system of motor.
Defective waste toner motor.
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Waste toner motor and front PWB (YC5) Front PWB (YC3) and engine PWB (YC7)
Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any.
Defective waste toner motor. Replace the waste toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any.
Defective waste toner motor. Replace the waste toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.