Description: Toner motor Y error A state in which the lock signal is detected for 20 times has been detected 3 times during the toner motor Y is activated.
Causes: Defective connector cable or poor contact in the connector. Defective screw sensor Y. Defective toner motor Y. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Toner motor Y and engine PWB (YC27) Defective toner motor Y. Replace the toner motor Y. Defective engine PWB. Replace the engine PWB and check for correct operation.