Description: DF staple motor error 1 JAM7000 is detected twice.
Causes: Defective connector cable or poor contact in the connector (4000-sheet finisher). Defective connector cable or poor contact in the connector (1000-sheet finisher). Defective DF staple sensor. Defective DF staple motor. Defective DF main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Staple unit and DF main PWB (YC17) Defective DF staple sensor. Defective DF staple motor. Replace the staple unit. Defective DF main PWB. Replace the DF main PWB and check for correct operation.