Description: H-Sync detection error: H-Sync signal detection PC board cannot detect laser beams.
Remedy: Is the relay connector (CN212) disconnected or almost disconnected? (Are they locked with the latches?) Is the harness between the LGC board (CN356) and the SNS board open circuited, broken or disconnected? Is the cable between the LGC board (CN356) and the LDR board open circuited or broken? Are the connectors (CN321 and CN326) on the LGC board disconnected? | YES 1. Reconnect the harness and the cable. NO Has the contact terminal of the cable between the LGC board (CN326) and the LDR board come off? YES 1. Replace the laser optical unit. between the power supply unit and the LGC board. NO 1. Check if the conductor pattern on the LGC board is open-circuited or short-circuited. 2. Check if the equipment is grounded. 3. Replace the laser optical unit. 4. Replace the LGC board.