Description: Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally. [MJ-1103/1104] Front alignment motor abnormality: The front alignment motor is not rotating or the front alignment plate is not moving normally. [MJ-1103/ 1104]
Remedy: * You receive a [CB40] error when the [ED13] error occurs three times in succession. MJ-1103/1104 Is there any mechanical problem when the front alignment plate is moved? YES Fix the mechanism. NO Is the harness between the front alignment motor (M9) and the finisher control PC board (CN10) disconnected or open circuited? l YES • Reconnect the connector securely. • Replace the harness. NO Replace the front alignment motor (M9).