Description: Motor-ON time-out jam: The equipment does not operate normally because abnormality occurred on an interface between the SYS board and engine firmware.
Remedy: 1. Check if there is any paper in the equipment. Remove it if there is. 2. Check if the error is cleared by turning the power OFF and then back ON. 3. Check if the connectors connecting the SYS board, IMG board and LGC board are disconnected. 4. Check if the connectors connecting the IMG board and SLG board are disconnected. 5. Check if the connectors of the HDD are disconnected. 6. Replace the HDD, SYS board, IMG board and LGC board.