Code: 1400
Description: BR guide motor error
The BR decurler sensor won’t turn on three times in a row after the home position of the rotary guide has been detected.
The BR decurler sensor won’t turn on three times in a row after the home position of the rotary guide has been detected.
Causes: Defective connector cable or poor contact in the connector.
Defective drive transmission system of motor.
Defective BR guide motor.
Defective BR main PWB.
Defective engine PWB.
Defective drive transmission system of motor.
Defective BR guide motor.
Defective BR main PWB.
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. BR guide motor and BR main PWB (YC5) BR main PWB (YC2) and engine PWB (YC20)
Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any.
Defective BR guide motor. Replace the BR guide motor.
Defective BR main PWB. Replace the BR main PWB and check for correct operation.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any.
Defective BR guide motor. Replace the BR guide motor.
Defective BR main PWB. Replace the BR main PWB and check for correct operation.
Defective engine PWB. Replace the engine PWB and check for correct operation.