Description: BD steady-state error M The BD signal is not detected.
Causes: Defective connector cable or poor contact in the connector. Defective PD PWB M. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Laser scanner unit and LSU relay PWB (YC8) LSU relay PWB (YC3) and engine PWB (YC12) Defective PD PWB M. Replace the laser scanner unit. Defective engine PWB. Replace the engine PWB and check for correct operation.